News Center

Company News

Industry News

Home page

Thames Side Stainless Steel T68 Type S Load Cell C3 Certified

We have released a new type of S-type (or S-beam) load cell, made of stainless steel, and approved by OIML R60 to obtain C3 certification. This replaces the previous 650-type load cell. The T68 offers capacities of 250,500,1000,2000,5000 and 7500kg, in a 4-wire configuration. It can be used at extreme temperatures of -40 to 95 degrees Celsius; therefore, it is suitable for various applications without special versions, such as high-temperature types. However, for applications requiring continuous use at temperatures up to 150 degrees, an alternative version is also available.

2023

The domestic sensor industry is booming and the future is challenging.

A sensor is a detection device that can feel the information being measured, and can transform the sensed information into electrical signals or other required forms of information output according to a certain rule to meet the requirements of information transmission, processing, storage, Display, record and control requirements. There is still a certain gap between China and developed countries such as Europe and the United States, and the research technology is weak. At present, China's sensor technology can not fully meet the domestic demand for the time being. However, with the support of the state, the number of sensor companies and the scale of the industry in China have developed rapidly, and the future prospects are promising.

2023

How to judge the quality of the weighing sensor?

Weighing sensor good or bad judgment Weighing equipment after a long time of use may appear weighing inaccurate phenomenon, generally we have to through the calibration of the weighing control instrument to solve such problems. But sometimes no matter how calibration can not make the scale body return to normal, then we have to check in detail from all aspects of the weighing mechanism, and the core component of the weighing mechanism is the weighing sensor.

2023

Common faults of weighing instrument

1. Failure phenomenon: The large screen display does not display normal weighing data from the start. Cause of failure: the connection mode of weighing display interface and large screen interface is not unified. Solution: Find part of the contents of the weighing display manual and the large screen manual about the connection interface, and the correct connection interface can be normal.

2023

Four elements of weighing sensor selection

2023

How to choose the load cell range?

Relative accuracy: The relative accuracy is based on the rated range. For sensors of the same type, the relative accuracy is generally the same. For sensors with an accuracy of 0.3 R.O., sensors with a range of 100kg and 2t are both 0.3 accuracy grades. Accuracy: accuracy can be understood as: accuracy = relative accuracy * rated range, here

2023

Characteristics Analysis of Different Pressure Sensor Core Materials

At present, there are many kinds of pressure sensor core materials. The following briefly introduces the performance of several core materials 1. monocrystalline silicon Silicon has a wide range of applications in the production of integrated circuits and microelectronic devices, mainly using the electrical properties of silicon; in the MEMS micro-mechanical structure, it is using its mechanical properties, and then produce a new generation of silicon electromechanical devices and devices. Silicon material is abundant and low cost. Silicon crystal growth is easy, and there are ultra-pure and non-miscellaneous materials, not purity in the order of one billion, so its own internal friction is small, mechanical quality factor can be as high as 10 ^ 6 orders of magnitude. A properly designed micro-active structure, such as a micro-sensor, can achieve minimal hysteresis and creep, excellent repeatability and long-term stability, and high reliability. Therefore, the use of silicon material to make silicon piezoresistive pressure sensors is conducive to solving the three problems that have plagued the sensor field for a long time-hysteresis, repeatability and long-term drift.

2023

What problems should be paid attention to during the installation of the load cell

2023

< 1 2 >

You can contact us by phone or email.

Contact Information

Customer service

400-860-0503

Company Address:

14-3F, College Student Entrepreneurship Park, No. 1188 Zhongguan Road, Zhenhai District, Ningbo City, Zhejiang Province

Factory Address:

No. 5, Qingyang Electronic Information Industry Park, Chizhou, Anhui

Mailbox:wangyz@hankunnb.com

Telephone/Fax:0574-83013381

Contact

Manager Ye

Telephone:13486391162

Region: Central China, East China (Shandong, Jiangsu, Henan, Anhui, Hubei, Hunan, Shanghai, Zhejiang)

Manager Zhang

Telephone:13652102766

Region: Northeast, North China (Inner Mongolia, Heilongjiang, Jilin, Liaoning, Beijing, Tianjin, Hebei, Shanxi)

Manager Wang

Telephone:13819806607

Area: Northwest, Southwest (Xinjiang, Gansu, Ningxia, Shaanxi, Sichuan, Chongqing, Yunnan, Guizhou)

Manager Ye

Telephone:18968583658

Region: South China (Fujian, Guangdong, Guangxi, Jiangxi, Hainan, Taiwan)